English: A screen for lyrics
Dansk: En skærm til sangtekster
My project was created from:
1x 4 mm HDF front frame
1x transparent arylic screen protector
1x "Polyethen" foam for around screen *
1x 1,5 mm MDF screen back panel
2x "Polyethen" foam for around electronics *
1x black acrylic back for det box
1x black acrylic flip stand + foot pedal
Submitted by rallevondalle on Sun, 09/28/2014 - 10:33
So, I was traveling from Copenhagen to New Delhi and needed to bring along my OT, A4 and MD. It all had to be checked baggage because of size and weight, so I decided to make them their own little "suitcase".
This can all be done with a laser cutter able to handle sizes of minimum 600 x 400 mm. If you have a Fablab around, the cost is only some time and wood, boom. NB. this is for 4mm thick material. If you are using another material, you HAVE to make a new print file from Boxmaker - otherwise it won't work.
Submitted by signecreativeroots on Sat, 09/27/2014 - 12:45
These leaves binds two events together a Park(ing) Day event and a conference on urban communities. The participants gets them at the point of arrival, write messages, words and points down on the plastic leaf. In the end of the conference they hang the leaves on trees outside at the parking lot to give back to the community where the conference is being held.
we printed 3 set of wings and we learned a new program called inkskape it helped us to make the wings.
and the body and baby rocket and baby is lite and beatiful.
The initial idea was to make a robot-animal, that being charged with solar power, could flip its wings. Unfortunately we ran out os time, designing the body and the head (the grey pointy thing, on the picture) so our main focus became getting the whole thing painted and done.
We have made an octopus. It is a decoration for our school. The height including hat is 13cm and 7½cm without the hat. The octopus is 39cm long. It is made of cardboard and we have painted it in blue and black colors.
We found the design on thingiverse.com and used 123D Make to slice it.
We used InkScape to make the sign.
Submitted by uttefabbers on Thu, 09/25/2014 - 13:19
We are currently making a model of our school and we made it out of acrylic material we made 7 test in cardboard. we used a laser cutter and a computer program named inkscape and we use the program called boxmaker to design our building the ground is 20 X 10 X 4 cm. and our second floor is 16 X 6 X 3 cm.
Uttefabbers are: Bjørn, Sofus, Albert and Hector
First we made a sticker, but it got ruined. Then we made tree box, and then we made an other sticker with an skull where it said DANGER. and the box was in legnth 18 cm and the hight is 25 cm. and the legs hight is 16 cm and the legnth is 5 cm. and the arms legnth is 4 cm and the hight is 17 cm. and the head is legnth is 10 cm and the hight is 10 cm
We designed a fantasy insect/animal. The idea was to make an insect who looked like a bird. We drew the parts in InkScape, by using the "circle tool". After the parts are printed, took we a wire and attached it to the insect, so it can be hung from the ceiling.
Submitted by 12345678910 on Tue, 09/23/2014 - 13:00
we have made our design for our robot
and we have had laser cutter one of our robot parts
and we have made a model of our robot
and we have made a body: 250mm x 100mm x 60mm in 4mm mdf
and the head is 60mm x 60mm x 60mm in 4mm mdf
we have used wood,3v battery, two led and lilypad batteryholder.
Submitted by Utterslev_Skole on Tue, 09/23/2014 - 12:59
Our groups name is Utterslev_skole. we made 3 spiders we found on the internet. We found the spiders and the webs on a website named www.thingiverse.com, you search spider or spider web and scroll down and find the spiders and the webs. the webs did we cut in a lasercutter. We have 5 big webs made out of card-board and 4 big webs made out of acrylic. We have 2 small webs made out of card-board and 2 small webs made out of acrylic. We have glued 2 big card-board webs together. We have painted all the card-board webs white.