By Liisa Umm...
2015-09-11
box, lasercut, laser, acrylic, makercase
By angela
2015-06-15

Velkommen i børnebiblioteket


En eller anden tydelig markering af at man kommer ind i
børnebiblioteket.

Krav:

·       
Skal omfatte hele børnebiblioteket. Må ikke kun
indikere småbørn.

·       
Skal byde velkommen

·       
Skal virke både i betjent og selvbetjent
åbningstid

Skilte/opdeler med bogstavsangivelse Valby Bibliotek

På Valby Bibliotek mangler vi ”opdelere” til SM-let (letlæsning/ læsetræningsbøger
til de alleryngste elever). Bøgerne i denne gruppe henvender sig til børn fra
0. til 2. klasse. Både brugere og ansatte har brug for hurtigt at kunne se hvor
et nyt bogstav/en ny kategori begynder.

Krav:

·       
Skal stå i bladrekrybbe.

·       
Må ikke have skarpe kanter eller hjørner. Ellers
river man sig let, når man skal bladre i krybberne.

hvælving.


CUSTOM DRAWING SET - PLY 3mm

Pdf was printed to the laser cutter with the following settings.

(power, speed, frequency)

Cut - 100 , 40, 2500
Etch - 100, 40, 2500

I first printed page 2 of the pdf, which are the cut lines. Then left the board in place and printed the etch lines. In my experience this is easier and faster than trying to colour map.

Vin Kasse Poul & Ulla's Sølvbryllup

Første forsøg på en vin box til sølvbryllup-gave-indpakning.

The puzzle of how you feel and what you need

We live. We feel. We celebrate. We mess up. We learn. In each specific situation, after something that was said or done, after connecting to how we feel, these feelings tell us of fulfilled and unfulfilled needs. These needs are universal and also particular. For each situation we can work out a "map" of our feelings and needs. And just as penrose tiles, this is a map that fills the plane, but not in a regular way, because we are all different and each situation is different.

Lasercut Tear Drop Lamp

I made this lamp from a design i found here: http://www.thingiverse.com/thing:5730

It is designed for 3 mm material, I chose birch plywood which I think gives a nice contrast with the dark edges.

It was fairly easy to set up and cut but the assembly was rather time-consuming. The lamp has to be assembled around the fitting with the bulb in it which also means that you need to disassemble the lamp to change the light bulb. This might be possible to change through a design alteration and any contributions are welcome.

Lamp for FABLAB

Lamp for FABLAB

The idea was to use as less material as possible
work with light and darkness
work with geometric objects

Laservæg

- Star Wars skilte (lasercut)
- Hoved-prøver af forskellige materialer (lasercut)

Door Locker with RFID

Project Description:

The idea was to create a door with an RFID-controlled lock.

We started out making the physical door using the laser cutter. We printed hinges in mat board with the laser cutter and covered these with vinyl pieces with the same shape to stregthen the hinges.

The door was printed in 3 equally sized pieces of mat board, and a frame was cut by hand in mat board to support the door. We glued the lot to the existing closet.

Pages

Subscribe to Copenhagen Fablab RSS